The slide projectors are rack mounted and located in the
booth. To use, first slide the rack into approximate
position in front of the projection window.
If using a single tray of slides, put the carousel on the top
slide projector. You don't need to recable anything for a
single tray.
To use both trays simultaneously (dissolving between the two),
access the cabling directions from the AMX controller slide
projector page.
There are separate AMX control pages for single or dual slide
projector operations. Make sure you are on the correct page.
Because of the weight of the lenses, the auto focus will make
the picture sway slightly as you advance slides. These
lenses fit the focal length to the screen and were a replacement
for two others that projected too large an image.
|
|
Notes: |
A copy of these directions is in the
lectern under the camera.
Remember to select either upper
or base for your lighting source.
Power switch is located on
the upper left side of the base.
Remember to select the
document camera as the source on the computer page of the
touch screen.
|
|
