|
The Rhode Island 4-H
Show Box |
|
|
|
Introduction: An essential item for the 4-H Member
planning a livestock project is an Equipment Show Box. The show box provides
a neat and orderly storage space for the equipment and supplies needed at
local, state and regional fairs and field days. This Show Box is designed to
be constructed of waterproof plywood and will provide dry watertight storage
space during rainy weather. Materials Needed: |
|
Hardware: 1 pair- 4 heavy
"T" hinges 2 each- 3-1/2"
folding trunk handles 1 each- 3" hasp 1 piece light chain
24" long 1 box- #9 1-1/4"
long flat head wood screws 1 box- #9 1-3/4"
long flat head wood screws 1/2 lb- 2 penny finishing
nails 24 each- #8 stove bolts
3/4" (attaches hinges) 24 each- washers 1 can- waterproof glue * This manuel was prepared by Lawrence J. Rondeau and has been used to make hundreds of show boxes throughout the years. |
Lumber: 1-Sheet of 1/2" AC
Exterior Plywood 4' X 8' 1-8' long, 6" wide,
finished clear pine or fir 1-8' long, 8" wide,
finished clear pine or fir 1-8' long, 3/4"
thick, 3" wide chair rail or casing pattern molding Finishing Materials: 1 Can- Plastic wood 1 quart- plywood sealer 1 quart- white enamel
undercoat or sealer 1 quart- white enamel
(outside) 1 can- one-half pint
forest green enamel 1 can- one-half pint
royal blue enamel |
