|
The Rhode Island 4-H
Show Box |
|
|
Final Finishing Step 15: Fill all holes over screw heads, small
cracks at joints and any dents or scratched with Plastic Wood. Allow to dry overnight then sand entire
box smooth with 1/0 or 2/0 grade 80 or 100 grit sandpaper. Finish sanding with 6/0 grade or 220 grit
sandpaper. Wipe off all dust. |
Apply one coat of plywood sealer,
following instructions on the can, to inside and outside of box. Allow to dry completely (according to
directions on can). Apply enamel undercoat
or primer to entire box inside and outside.
Allow to dry, following directions on
can. Sand lightly with 6/0 or 220
sandpaper. Wipe off dust. Apply white outside Enamel to box (inside
and outside). Allow to dry, following
directions on can. Paint top and
bottom Molding, Handles and Runners dark blue enamel. Trace the 4-H Emblem on the cover and
paint with dark green enamel. Paint
or stencil your Name, Town and Sate as shown on front of box. Allow to dry thoroughly and place your
supplies inside.
Good
Luck in The Show Ring! |
|
|
|
