University of Rhode Island

Picture of Library

[an error occurred while processing this directive]

   
[an error occurred while processing this directive]
University Libraries
Faculty Publications
Compiled by Margaret J. Keefe

Faculty Publications 1992

ENGINEERING
Mechanical Engineering & Applied Mechanics

Adley, M. D. and M. H. Sadd. "Continuurn Models for Materials With Lattice Like Microstructures." Computers & Structures. 43(l):13-18. 3 April 1992.

Andrieu, E., R. Molins, H. Ghonem and A. Pineau. "Intergranular Crack Tip Oxidation Mechanism in a Nickel Based Superalloy." Materials Science and Engineering. A, Structural Materials. 154(l):21-28.1992.

Asako, Y., H. Nakamura, Y. Yamaguchi and M. Faghri. "Three Dimensional Natural Convection in a Vertical Porous Layer With A Hexagonal Honeycomb Core." Journal of Heat Transfer. 114(4):924-927. November 1992.

Core, K. L. and Z. Mao. "Visualization of Flow Surrounding Coalescing Evaporating Two-Phase Droplets in Immiscible Liquid Media." American Society of Mechanical Engineers Papers from the Winter Annual Meeting. ASME. (92 (WA/)FE 4) 1992.  p.1-7.

Datseris, Philip.  SEE: Yang, Biwu; Ziegert, J. C.

Faghri, Mohammad.  SEE also: Asako, Y.; Lee, Jae Heon; Viekman, Bruce E.

Faghri, M. "Natural Convection in Enclosures With an Irregular Wall."  IN: International Symposium on Transport Phenomena in Heat and Mass Transfer (4th. 1991. Sydney, N.S.W.). Transport Phenomena in Heat and Mass Transfer, Proceedings. Edited by J. A. Reizes. Elsevier. 1992.  p.112-123.

Faghri, M., Y. Asako, G. Bernard and A Chaboki. "Unsteady Laminar Natural Convection, Radiation and Conduction Within an Enclosure With an Obstruction." IN: General Papers in Heat Transfer and Heat Transfer in Hazardous Waste Processings. ASME. (HTD v.212) 1992.  p.63-71.

Ghonem, Hamouda.  SEE also: Andrieu, E.; Rosenberger, A. H.; Zheng, D.

Ghonem, H. and D. Zheng. "Depth of Intergranular Oxygen Diffusion During Environment-Dependent Fatigue Crack Growth in Alloy 718." Materials Science and Engineering. A. Structural Materials. 150(2):151-160. February 29, 1992.

Ghonem, H. and D. Zheng. "Environmentally Dominated Fatigue Crack Growth Model for Alloy 718."  IN: Mechanical Behaviour of Materials VI; Proceedings of the Sixth International Conference, Kyoto, Japan, 29-July 2 August 1991. Edited by Masahiro Jono and Tatsuo Inoue. Pergamon. 1992. 4v.  p.D373-378.

Ghonem, H. and D. Zheng. "Frequency Interactions in High-emperature Fatigue Crack Growth Superalloys." Metallurgical Transactions. A. Physical Metallurgy and Materials Science. 23(11):3067-3072. November 1992.

Ibrahim, O. M., S. A. Klein, J. W. Mitchell. "Effects of Irreversibility and Economics on the Performance of a Heat Engine." Journal of Solar Energy Engineering. 114:267-271. November 1992.

Jouaneh, Musa K.  SEE also: Srinivasa, Narayan; Yang, Renyi; Zeng. Yang.

Jouaneh, Musa and Huawei Tian. "Accuracy Improvement of a Piezoelectric Actuator With Hysteresis."  IN: Proceedings of the 1992 USA-JAPAN Symposium on Flexible Automation, San Francisco, CA. July 1992. 1992.  p.631-637.

Jouaneh, Musa and Sabbir S. Rangwala, Editors. Precision Machining: Technology and Machine Develogment and Improvement: Presented at the Winter Annual Meeting of the American Mechanical Engineers. ASME. (PED Series, vol.58) 1992.  211p.

Jouaneh, Musa, R. Lemaster and F. Beall. "Study of Sliding Motion Using Acoustic Emission Signal Analysis." Journal of Acoustic Emission. 10(3/4):83-89. 1991/1992.

Katz, Ira M. E. J. Shaughnessey and Zhongqin Zhang. "Method for Calulcating the Average Cross-Section Pressure Distribution in Tube Flows Within Vorticity-Streamfunction Formulation." Numerical Heat. Part B, Fundamentals. 22(3):349-365. 1992.

Kim, Thomas J.  SEE: McEwen, Everett; Zeng, Jiyuc; Zheng, J. Y.

Lee, Jae Heon, Y. R. Back and M. Faghri. "Natural Convection in Enclosures With an Irregular Wall. " IN: Transport Phenomena in Heat and Mass Transfer Edited by J. A Reizes. 1992.  p.112-113.

Lessman, Richard C.  SEE: Zhang, Zongqin.

McEwen, Everett, Charles Nash, Joseph Estrin and Thomas J. Kim. "Implementation of an Undergraduate Integrated Design Program."  IN: Frontiers in Education Conference. (22nd. 1992. Nashville, Tenn.) Proceedings: Frontiers in Education Conference ... Towards 2000: Facing the Future in Engineering, Education, Edited by Lawrence P. Grayson. IEEE.  1992. p .311-314.

Martonen, T. B. and Z. Zhang. "Comments on Recent Data for Particle Deposition in Human Nasal Passages." Journal of Aerosol Science. 23(4):667-674. September 1992.

Martonen, T. B., Z. Zhang and Y. Yang. "Interspecies Modeling of Inhaled Particle Deposition Patterns." Journal of Aerosol Science. 23(4):389-406. June 1992.

Narendran, N., A. Shukla and S. Letcher. "Optical-Fiber Interferometric Strain Sensor Using a Single Fiber." Experimental Techniques. 16(6):33-36. November/December 1992.

Nash, Charles D.  SEE: McEwen, Everett.

Olson, Daniel G.  SEE also: Ziegert, J. C.

Olson, D. and L. Saggare. "Simplified Approach for Force and Power-Flow Analysis of Compound Epicyclic Spur Gear Trains."  IN: Advances in Design Automation: Presented at the 1992 ASME Design Technical Conferences... Edited by David A Hoeltzel. American Society of Mechanical Engineers. (DE Series, vol.44 1 44 2) 1992.  p.83-89.

Olson, D. G., A G. Erdman and Don R. Riley. "Topologial Analysis of Single Degree of Freedom Planetary Gear Trains." Journal of Mechanical Design. 113(l):10-16. March 1991.

Patton, Alexander J. Fire Litigation Sourcebook; Technical, Medical and Legal Aspects. Garland Law. 1986 (Looseleaf)

Rosenberger, A H. and H. Ghonem. "The Effect of the Compressive Stress Strain Excursion on the Elastic Plastic Small Crack Growth in Alloy 718 at 650 Degrees C."  IN: Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials 3, Edited y K. T. Riw. Elsevier Applied Science. 1992.  p.545-551.

Rosenberger, A. H. and H. Ghonem. "Effect of Cycle Mean Strain on Small Crack Growth in Alloy 718 at Elevated Temperatures," Fatigue & Fracture Engineering Materials and Structure. 15(11):1125-1139. November 1992.

Rosenberger, A. H., E. Andrieu and H. Ghonem. "Influence of High Temperature Elastic Plastic Small Crack Growth in a Nickel Based Superalloy on the Life Presdiction of Structural Components."  IN: Superalloys 1992; Proceedings of the Seventh International Symposium on Superalloys.... Minerals, Metals & Materials Society. 1992.  p.737-746.

Sadd, Martin H.  SEE also: Adley, M. D.

Sadd, M. H., Lin Qiu, W. G. Boardman and A. Shukla. "Modeling Wave Propagation in Granular Media Using Elastic Networks." International Journal of Rock Mechanics and Mining Sciences. 29(2):161-170. March 1992.

Shukla, Arun.  SEE also: Narendran, N.; Sadd, Martin H.

Shukla, A., R. Singh and N. Narendrum. "Determination of Stress Intensity Factors Using Interference and Polarization Based on Optical Fiber Sensors."  IN: Proceedings of the VII International Congress on Experimental Mechanics. Society for Experimental Mechanics. 1992.  p.251-256.

Shukla, A., C. Y. Zhu and Y. Xu. "Dynamic Stresses in Granular Assemblies With Microstructural Defects." Journal of Engineering Mechanics. 118(l):190-201. Jan. 1992.

Shukla, A. and R. Singh. "Influence of Particle Shape on Stress Wave Propagation in Granular Media."  IN: Proceedings of the VII International Congress on Experimental Mechanics. Society for Experimental Mechanics. 1992.  p.584-589.

Shukla, A., Associate Technical Editor. Experimental Mechanics. Vol.32, 1992.

Shukla, A., R. Singh and N. Narendran. "Performance of Fiber Optic Sensors in Fracture Mechanics Applications."  IN: European Conference on Smart Structures and Materials (1st. 1992. Glasgow, Scotland). First European Conference on Smart Structures and Materials.... Edited by B. Culshaw, P. T. Gardiner and A McDonach. Institute of Physics Pub. and EOS/SPIE. (Proceedings of the SPIE -- The International Society for Optical Engineering, v.1777) 1992.  p.285-288.

Srinivasa, Narayan and Musa Jouaneh. "A Neural Network Model for Invariant Pattern Recognition." IEEE Transactions on Signal Processing. 40(6):1595-1599. June 1992.

Taggart, David G., Jialiang Qin and Mark D. Adley. "Evaluation of Analytical and Numerical Models for the Elastic Plastic Response of Particulate Composites."  IN: Processing, Fabrication, and Manufacturing, of Composite Materials. ASME. (MD v.35) 1992.  p.187-200.

Viekman, Bruce E., Roger D. Flood, Mark Wimbush, Mohammad Faghri, Yutaka Asako and John C. Van Leer. "Sedimentary Furrows and Organized Flow Structure: A Study in Lake Superior." Limnology and Oceanography. 37(4):797-812. June 1992.

White, Frank M. Contributed Papers in Fluids Engineering 1992: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. American Society of Mechanical Engineers. 1992.  69p.

Yang, Biwu, Philip Datseris and Todd Archer. "Development of an Automatic Earring Post Assembly System Using an Expert System Approach.  IN: Design Conference (ASME) (18th: 1992. Scottsdale, Ariz.). Advances in Design Automation, 1992, Presented ... ; Edited by David A Hoeltzel. American Society of Mechanical Engineers. (American Society of Mechanical Engineers. Design Engineering Series, v.44) 1992.  p.75-81.

Yang, Renyi and Musa Jouaneh. "Design and Analysis of a Low Profile Micro-Positioning Stage."  IN: Jouaneh, Musa and Sabbir S. Rangwala, Editors. Precision Machining, Technology and Machine Development and Improvement: Presented at the Winter Annual Meeting of the American Mechanical Engineers.... ASME. (PED Series, vol.58) 1992.  p.131-142.

Zeng, J. Y. and T. J. Kim. "Development of an Abrasive Waterjet Kerf Cutting Model for Brittle Material."  IN: Jet Cutting Technology, Edited by A Lichtarowicz. Kluwar. (Fluid Mechanics and Its Applications, v.13) 1992.  p.483-502.

Zeng, Jiyue, Thomas J. Kim and Robert J. Wallace. "Quantative Evaluation of Machinability in Abrasive Waterjet Machining."  IN: Jouaneh, Musa and Sabbir S. Rangwala, Editors. Precision Machining: Technology and Machine Development and Improvement: Presented at the Winter Annual Meeting of the American Mechanical Engineers.... ASME. (PED Series, vol.58) 1992.  p.167-179.

Zhang, Zongqin.  SEE also: Katz, I. M.; Martonen, T. B.; Zhimin, Hu.

Zhang, Zongqin, Ted Martonen and Richard Lessman. "Numerical Study of Laryngeal Air Flow."  IN: American Society of Mechanical Engineers. Winter Meeting. (1992. Anaheim, Calif). 1992 Advances in Bioengineering ... ; Edited by Martha Warren Didez. American Society of Mechanical Engineers. (BED Series, vol.20) 1992.  p.451-454.

Zheng, D. and H. Ghonem. "Influence of Prolonged Thermal Exposure on Intergranualar Fatigue Crack Growth Behavior in Alloy 718 at 650 Degrees C." Metallurgical Transactions. A. Physical Metallurgy and Materials Science. 23(11):3169-3171. November 1992.

Zheng, D., H. Ghonem, E. Andrieu and A. Pineau. "Localized Control of Crack Tip Deformation in Nickel-Base Superalloys."  IN: International Conference on Computer Aided Assessment and Control of Localized Damage (2nd. 1992. Southampton, England). Localized Damage 92. v.l: Fatigue and Fracture Mechanics. Computational Mechanics Co Published With Elsevier. 1992.  p.567-580.

Zheng, J. Y. and T. J. Kim. "Development of an Abrasive Waterjet Kerf Cutting Model for Brittle Materials."  IN: Jet Cutting Technology, Edited by A. Lichtarowicz. Kluwer. (Fluid Mechanics and Its Applications, v. 13) 1992.  p.483-502.

Zhimin, Hu, Zhaoyuan Han and Zongqin Zheng. "Self-Sustained Fluid Oscillation Process and Its Applications."  IN: Industrial and Environmental Applications of Fluid Mechanics. ASME. (FED v.145) 1992.  p169-172.

Ziegert, J. C., D. G. Olson and P. Datseris. "Description of Machine Tool Errors Using Screw Coordinates." Journal of Mechanical Design. 114(4):531-535. December 1992.


Return to Faculty Publications 1992 Table of Contents.
Return to Faculty Publications homepage.