Faculty Publications 1995
Adley, M. D. and D. G. Taggart. "Dilute Estimates of Inelastic Deformation in Metal Matrix Composites." Computers and Structures. 57(5):773-781. Dec. 3, 1995.
Asako, Y. , Y. Yamaguchi, Lishun Chen and M. Faghri. "Combined Natural Convection and Radiation Heat Transfer in a Vertical Air Cavity With Hexagonal Honeycomb Core of Negligible Thickness." IN: 1995 National Heat Transfer Conference. ASME. (HTD Vol.305) 1995. 3:73-79.
Asako, Y. and Mohamiad Faghri. "Prediction of Turbulent Heat Transfer in the Entrance of an Array of Heated Blocks Using Low Reynolds Number k-e Model." Numerical Heat Transfer. Pt. A. 28(3):263-277. September 1995.
Asako, Y. , Y. Yamaguchi, T. Yamanaka and M. Faghr . "Unsteady Three Dimensional Natural Convection in an Inclined Air Slot With a Hexagonal Honeycomb Core." Journal of Heat Transfer. 117(3):634 640 August 1995.
Brandes, H. G. , M. H. Sadd and A. J. Silva. "Finite Element Modeling of a Deep Sea Clay in Long Term Laboratory Creep Test." International Journal for Numerical and Analytical Methods in Geomechanics. July 1995.
Broadmeadow, J. T. and O. M. Ibrahim. "Diesel Engine NOx Reduction Through Exhaust Re Burning and Ammonia Injection." Proceedings. Vol. 2, Conf 30:175+ 1995.
Datseris, Philip. SEE: Mankame, A.
Faghri, Mohammad. SEE also: Asako, Y,; Molki, M.; Sunden, Bengt; Yang, L. C.
Faghri, M., M. Molki, J. Chrupcala and Y. Asako. "Entrance Analysis of Turbulent Flow in an Array of Heated Rectangular Blocks." IEEE Transactions on Components , Packaging and Manufacturing Technology. Part. A. 18(3):546-552. September 1995.
Ge, Ping and Musa Jouaneh. "Modeling Hysteresis in Piezoceramic Actuators." Precision Engineering. 17 (3):211 221. July 1995.
Ghonem, Hamouda. SEE also: Madsen, A.; Rosenberger, A. H.; Tamin, M. N.; Zhang, T. ; Zheng, D.
Ghonem, H., A. H. Rosenberger and A. Madsen. "Aging Effects on the Creep Behavior of the Near Alpha Titanium Alloy Ti 1100." Journal of Materials Engineering Performance. 4(2):182 April 1995.
Ibrahim, O. M. SEE also: Broadmeadow, J. T.
Ibrahim, O. M. and H. G. Ladas. "Finite Time Thermodynamic Analysis of the Stirling Enaine." IN: Proceedings of the Intersociety Energy Conversion Engineering Conference, ed. by D. Y. Goswami, L. D. Kannberg, T. R. Mancini and S. Somasundarm. ASME. 1995. p.C431-436.
Ibrahim, O. M. and S. A. Klein. "High Power Multi Stage Rankine Cycles. " Journal of Energy Resources Technology. 117(3):192-196. September 1995.
Jouaneh, Musa. SEE: Ge, Ping; Mankame, A
Kamemoto, Kyoji and Frank M. White, Editors. Individual Papers in Fluids Engineering, 1995: Presented at the 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, August 13-18, 1995, Hilton Head, So Carolina. American Society of Mechanical Engineers. (FED Series, v. 207) 1995. 163p.
Khanna, S. K. and A. Shukla. "On the Use of Strain Gages in Dynamic Fracture Mechanics." Engineering Fracture Mechanics. 51(6):933 948. August 1995.
Kim, Thomas J. "From the Dean's Desk." University of Rhode Island Engineering Newsletter. 1(2):2. Spring 1995; 2(l):2. Fall 1995.
Madsen, A. and H. Ghonem. "Separating the Effects of Ti3Al and Silicide Precipitates on the Tensile and Crack Growth Behavior at Room Temperature and 593 Degrees Celsius in a Near Alpha Titanium Alloy." Journal of Materials Engineering and Performance. 4(3):301 307. June 1995.
Mankame, Amil, Musa Jouaneh and Peter Datseris. "Orientation and Stacking of Parts Based on Internal Features " IN: Machine Tool, In Line, and Robot Sensors and Controls, Ed. by B. 0. Nnajki and K. C. Lau. SPIE. (Proceedings of the SPIE, Vol. 2595) 1995. p.178-190.
Martonen, T. B., Z. Zhang, Y. Yang and G. Bottei. "Gas Transport Processes in Human Airways." Inhalation Toxicology. 7(3):303 318. 1995.
Molki, M. , M. Faghri and O. Ozbay. "A Correlation f or Heat Transf er and Wake Ef f ect in the Entrance Region of an In Line Array of Rectangular Blocks Simulating Electronic Components. " Journal of Heat Transfer. 117 (1):40 46. January 1995.
Narendran, Nadarajah, Chonghua Zhou, Stephen Letcher and Arun Shukla. "Fiber optic Acoustic Sensor for Nondestructive Evaluation." Optics and Lasers in Engineering. 22(2):137-148, 1995.
Patton, Alexander J. and Patricia A. Helm. "Building Contents Flammable and Explosive (Abstract)." IN: Patton, Alexander J. Fire Litigation Sourcebook. Second Edition. 1995 Supplement. John Wiley & Sons 1995. 2:1-8.
Patton, Alexander J. Fire Litigation Sourcebook. Second Edition. 1995 Supplement. John Wiley & Sons. 1995. Vol. 1, 23p; vol. 2, 20p.
Rosakis, Ares J. , Arun Shukla and Yapa D. S. Rajapakse. "Editorial."IN: Steele Charles, A. J. Rosakis, A. Shukla and Y. Dd. S. Rajapakse. A Symposium on the Dynamic Failure Mechanics of Modern Materials in Memory of Professor J. Duff. Pergamon. 1995. p.2421-2422.
Rgsenberger, A. H. , A. Madsen and H. Ghonem . "Aging Effects on the Creep Behavior of the Near Alpha Titanium Alloy Ti 1100." Journal of Materials Engineering and Performance. 4(2):182-187. April 1995.
Sadd, Martin H. SEE: Brandes, Horst G.
Shukla, Arum. SEE also: Khanna, S. K.; Nardendran, Nadarajah; Sienkiewicz, Frank; Singh, R.; Steele, Charles; Vallee, Glenn E.; Zhou, C.
Sbukla, Arun, Associate Technical Editor. Experimental Mechanics. Vol. 35, 1995.
Sienkowicz, Frank, Arun Shukla and Jack Dvorkin. "A Photoelastic Investigation of Stress Wave Propagation in Cemented Granular Media." IN: 1995 SEM Spring Conference on Experimental Mechanics, Grand Rapids, MI, June 12-14, 1995. p.299-305.
Singh, R. P. and Arun Shukla. "Dynamic Failure of Biomaterial Interfaces; A Photoelastic Investigation." IN: 1995 SEM Spring Conference on Experimental Mechanics, Grand Rapids, MI, June 12-14, 1995. p.31-38.
Singh, Raman, Arun Shukla and Harry Zervas. "Effect of Flaws on the Stress Wave Propagation in Particulate Aggregates; Near and Far Field Observations." International Journal of Solids and Structures. 37 (17 18):2523-2546. September 1995.
Steele, Charles, A. J. Rosakis, A. Shukla and Y. D. S. Rajapakse. A Symposium on the Dynamic Failure Mechanics of Modern Materials in Memory of Professor J. Duff . Pergamon, 1995.
Sunden, Bengt, Mohammad Faghri and Elizabeth J. Kenyon. "Overview of Fabrication Methods and Fluid Flow and Heat Transfer Characteristics of Micro Channels." IN: Advances in Engineering Heat Transfer. Computational Mechanics. 1995. p.3-23.
Taggart, David G. SEE: Adley, M. D.
Tamin, M. N. , D. J. Osborn and H. Ghonem. " Influence of Interfacial Properties on Fiber Debonding in Titanium Metal Matrix Composites." IN: Fatigue and Fracture at Elevated Temperatures; Proceedings of the 1995 ASME International Mechanical Engineering Congress and Exposition. ASME. 1995. p.121-133.
Vailee, Glenn E. and Arun Shukla. "Development of a Dynamic Load Detection Apparatus For Elastomeric Materials." Journal of Testing and Evaluation. 23(5):347-353. September 1995.
White, Frank M. SEE also: Kamemoto, Kyoj i.
White, Frank M., Board on Communications. Journal of Applied Mechanics. Vol. 62, 1995.
White, Frank M., Board on Communications. Journal of Biomedical Engineering. Vol. 117, 1995.
White, Frank M., Board on Communications. Journal of Dynamic Systems, Measurement, and Control. Vol.117, 1995.
White, Frank M., Board on Communications. Journal of Engineering for Gas Turbines and Power. Vol. 117, 1995.
White, Frank M., Board on Communications Journal of Engineering for Industry. Vol. 117, 1995.
White, Frank M., Board on Communications. Journal of Engineering Materials and Technology. Vol. 117, 1995.
White, Frank M., Board on Communications. Journal of Fluids Engineering. Vol. 117, 1995.
White, Frank M. Board on Communications. Journal of Heat Transfer. Vol. 117, 199 5.
White, Frank M., Board on Communications. Journal of Mechanical Design. Vol. 117, 1995.
White, Frank M., Board on Communications. Journal of Pressure Vessel Technology. Vol.117, 1995.
White, Frank M., Board on Communications. Journal of Solar Energy Engineering. Vol. 117, 1995.
White, Frank M., Board on communications. Journal of Tribology . Vol,117, 1995,
White, Frank M., Board on Communications. Journal of Vibration and Acoustics. Vol.117, 1995.
White, Frank M. Solutions Manual to Accompany Fluid Mechanics. 3rd Edition. McGraw Hill. 1995. 758p.
Yang, L. C. , Y. Asako. , Y. Yamaguchi and M. Faghri. "Numerical Prediction of Transitional Characteristics of Flow and Heat Transfer in a Corrugated Duct." IN: Heat Transfer in Turbulent Flows. ASME. (HTD Vol. 318) ASME. 1995.
Zhang., T. and H. Ghonem. "Time Dependent Fatigue Crack Growth in Titanium Metal Matrix Composites." Fatigue & Fracture of Engineering Materials & Structures. 18(11):1249-1262. November 1995.
Zhang, Zongqin. SEE: Martonen, T. R.
Zheng, D. and H. Ghonem. "Fatigue Crack Growth of SM 1240/TIMETAL 21S Metal Matrix Composites at Elevated Temperatures." Metallurgical and Materials Transaction. A. 26(9):2469-2475. September 1995.
Zhou, C , S. Letcher and A. Shukla. "Fiber Optic Acoustic Sensor for Nondestructive Evaluation." Optics and Lasers in Engineering. 22(2):137-148. 1995.
Zhou, Chonghua, Stephen V. Letcher and Arun Shukla. "Fiber Optic Microphone Based on a Combination of Fabry Perot Interferometry and Intensity Modulation " Journal of the Acoustical Society of America. 98(2,pt.1):1042-1046. August 1995.