[an error occurred while processing this directive]
Faculty Publications 2003
Asaka, Yutaka, Tianqi Pi, Stephen E. Turner and Mohammad Faghri. "Effect of Compressibility on Gaseous Flows in Micro-Channels." International Journal of Heat & Mass Transfer. 46(16):3041-3050. July 2003.
Barbare, Nikhil, Arun Shukla and Arijit Bose. "Uptake and Loss of Water in a Cenosphere-Concrete Composite Material." Cement and Concrete Research. 33(10):1681-1686. October 2003.
Chalivendra, V. B., A. Shukla, A. Bose and V. Parameswaran. "Processing and Mechanical Characterization of Lightweight Polyeurethane Composites." Journal of Materials Science. 38(8):1631-1643. 2003.
Chalivendra, V. B., A. Shukla, A. Bose and V. Parameswaran. "Quasi-Static Stress Fields for a Crack Inclined to the Property Gradation in Functionally Graded Materials." Acta Mechanica. 162(1-4):167-184. May 2003.
Chelidze, David. SEE also: Cusumano, J. P.; Hartt, K.; Taggart, D. G.
Chelidze, David. "Dynamical Systems Approach to Material Damage Diagnosis." IN: Proceedings of the ASME Design Engineering Technology Conference. 5B:1263-1270. 2003.
Chelidze, David. "Multidimensional Hidden Slow Hierarchical Dynamical System." American Society of Mechanical Engineers, Dynamic Systems and Control DIiision, DES. 72(2):1079-1086.
Cusamano, J. P. and D. Chelidze. "Phase Space Warping: A Dynamical Systems Approach to Diagnostics and Prognostics (Abstract)." IUTAM Symposium on Chaotic Dynamics and Control of Systems and Processes in Mechanics. Booklet of Abstracts. 2003. p.27-28.
Evora, Victor M. F. and Arun Shukla. "Fabrication, Characterization, and Dynamic Behavior of Polyester/TiQ2 Nanocomposites." Materials Science and Engineering A. Structural Materials Properties Microstructure and Processing. 361(1-2):358-366. November 25, 2003.
Faghri, Mohammad. SEE also: Asaka, Yutaka; Goncalves, Eduardo; Sun, H. W.; Sunden, Bengt.
Faghri, Mohammad. "Effect of Compressibility on Gaseous Flows in Micro-Channels." International Journal of Heat and Mass Transfer. 46:3041-3050. 2003.
Faghri, Mohammad. SEE also: Sun, Hongwei.
Faghri, Mohammed, Associate Editor. Journal of Heat Transfer. 2003.
Faghri, M. Phase Change in Low and Jittery Gravity Environment. NASA Technical Report. 2003.
Ferrante, William. "Let Bulger Exercise Constitutional Rights (Letter)." Providence Journal. January 19, 2003. p.19.
Ghonem, Hamouda. SEE: Sansoz, F.; Zaki, A. S.
Giri, D. and M. Jouaneh. "Performance Improvement of a 3-D Inspection Priocess." IN: Photonics East, Technologies for Robots, Automation, and Manufacturing. (SPIE Proceedings.) October 2003.
Goncalves, Eduardo, M. Faghri, Y. Asako and M. Charmchi. "Numerical Solution of Melting in Side-Heated Rectangular Enclosure Under Electromagnetically Simulated Low Gravity." American Society of Mechanical Engineers, Heat Transfer Division, HTD. 374(1):281-290. 2003.
Hartt, K. and D. Chelidze. "A Study of Measurement Noise in Chaotic Signals." IN: 2003 SIAM Conference on Applications of Dynamical Systems Symposium.
Jouaneh, Musa K. SEE also: Giri, D.; Warnecke, Martin.
Jouaneh, Musa and P. Carnavale. "Autonomous Robotic Mini-Golf." IEEE Robotics and Automation Magazine. 20(2):51-61. 2003.
Jouaneh, Musa and Renyi Yang. "Modeling of Flexure-Hinge Type Lever Mechanisms." Precision Engineering. 27(4):407-418. October 2003.
Jouaneh, Musa and B. Stucker. "A Motion Planning Approach for Fabrication of Complex 3-D Shapes in a LENS Process." IN: Proceedings of the 2003 Solid Freeform Fabrication Symposium, Austin, TX, August. 2003.
Jouaneh, Musa. "A New Approach to Teaching a Mechanical Systems Design Course." American Society of Mechanical Engineers, Design Engineering Division. DE. 113:15-21. 2003.
Jouaneh, M. and B. Comerford. "Team-Based Product Design for Engineering and Business Majors." IN: Proceedings of the 2003 NCIIA 7th Annual Meeting. 2003. p.63-68.
Jouaneh, Musa and Paul Carnevale. "Watch Out, Tiger Woods." IEEE Robotics & Automation Magazine. 10(2):56-60. June 2003.
Kim, Thomas J. SEE: Taggart, David G.
Martonen, Ted B., Zongqin Zhang, G. Yue and C. J. Musante. "Fine Particle Deposition Within Human Nasal Airways." Inhalation Toxicology. 15(4):283-303. April 2003.
Meyer, Donna M. "Reynolds Equation for Spherical Bearings." Journal of Tribology. 125(1):203-206. January 2003.
Meyer, Donna M. and John A. Tichy. "3-D Model of a Total Hip Replacement In Vivo Providing Hydrodynamic Pressure and Film Thickness for Walking and Bicycling." Journal of Biomedical Engineering. 125(6):777-784. December 2003.
[Nassersharif, Bahram] "From the Dean." URI Engineering. Fall 2003. p.3.
Palm, William J. SEE also: Taggart, David G.
Palm, William J. WIE Mechanical Vibrations. Wiley. 2003. 1 Vol.
Parameswaran, V., A. Shukla and Everett McEwen. Remote Bridge Monitoring: A Survey. Rhode Island Department of Transportation, Research, and Technology Development, Department of Mechanical Engineering and Applied Mechanics, University of Rhode Island. 2003. 34p.
Ricci, V., A. Shukla, V. B. Chalivendra and K. H. Lee. "Subonic Interfacial Fracture Using Strain Gages in Isotropic-Orthotropic Material." Theoretical and Applied Fracture Mechanics. 39(2):143-161. March-April 2003.
Ricci, Vittorio, Arun Shukla and Mahesh Kavaturu. "Using Strain Gages to Investigate Subsonic Dynamic Interfacial Fracture in an Isotropic-Isotropic Biomaterial." Engineering Fracture Mechanics. 70(10):1303-1321. July 2003.
Rosakis, A. J. and C. E. Rousseau. "Influence of Fault Bends and Forks on the Growth of Dynamic Shear Ruptures." IN: Proceedings of the Rinberg Castle Workshop on Dynamic Fracture, Rinberg Castle, Germany, July 13-17, 2003.
Rousseau, Carl E. SEE also: Rosakis, A. J.
Rousseau, C. E. and A. J. Rosakis. "Effect of Faults and Bends on the Growth of Dynamic Sheer Ruptures." IN: Proceedings of the American Geophysical Union 2002 Fall Conference, San Francisco, CA, December 7, 2002.
Rousseau, C. E. and A. J. Rosakis. "On the Influence of Fault Bends on the Growth of Sub-Rayleigh and Intersonic Dynamic Shear Ruptures." Journal of Geophysical Research. B - Solid Earth. 109(9):#2411. September 4, 2003.
Sadd, Martin H., Qingli Dai, Lenkit Parameswaran and A. Shukla. "Simulation of Asphalt Materials Using Finite Element Micromechanical Model With Damage Mechanics." IN: Bituminous Mixtures 2003. (Transportation Research Record 1832) 2003. p.86-95.
Sansoz, F. and H. Ghonem. "Effects of Loading Frequency on Fatigue Crack Growth Mechanisms in a Alpha/Beta Ti Microstructure With Large Colony Size." Materials Science & Engineering. A - Structural Materials Properties Microstructure and Processing. 356(1-3):81-92. September 15, 2003.
Sansoz, F. and H. Ghonem. "Fatigue Crack Growth Mechanisms in Ti6242 Lamellar Microstructures: Influence of Loading Frequency and Temperature." Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 34(11):2565-2577. November 2003.
Shukla, Arun. SEE also: Chalirenda, V. B.; Evora, Victor M. F.; Parameswaran, V.; Sadd, Martin H.
Shukla, Arun, Eric J. Kovolyan, Joseph Grogan and Venkit Parameswaren. "Ballistic Performance of Surface Modified Ceramic Body Armor Material." IN: Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics. 2003. p.97.
Shukla, A. Durability and Performance of Novel Concrete-Cenosphere Compositers in Extreme Environments. Rhode Island Dept. of Transportation, Research and Technology Development. (FHNA-RIDOT-RTD-03-2) 2003. 50p.
Shukla, A., Venkit Parameswaran and Eric J. Kovolyan. Dynamic Strength Characterization of High Performance Concrete. Rhode Island Department of Transportation, Research and Technology. 2003.
Shukla, A., S. Letcher, R. Singh and N. Narenderan. "Fiber Optic Sensors and Fracture Mechanics." IN: Application of Fiber Optic Sensors in Engineering Mechanics, Edited by F. Ansari. ASCE. 2003.
Shukla, A., Associate Technical Editor. Lasers and Optics in Engineering. 2003.
Shukla, Arun and Venkitanarayan Parameswaran. Light Weight Particulate Composite Materials With Cenospheres as Reinforcements and Methods for Making the Same. US 6506819. Appl US 2000-7108616. 2003. 24p. (Patent)
Shukla, Arun and Victor M. F. Evors. "Mechanical Characterization of Polyester/T102 Nano Composits." IN: Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics. 2003. p.55.
Shukla, Arun, Vijaya B. Chalivendra, Venkitanarayan Parameswaran and Kwang H. Lee. "Photoelastic Investigation of Interfacial Fracture Between Orthotropic and Isotropic Materials." Optics and Lasers in Engineering.40(4):289-306. October 2003.
Shukla, Arun, Vijay Calivendra and N. Jain. "Static and Dynamic Fracture of an Inclined Isotropic Orthotropic Bi-Material Interface." IN: Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics. 2003. p.167.
Sun, Hongwei and Mohammad Faghri. "Effect of Surface Roughness on Nitrogen Flow in a Microchannel Using the Direct Simulation Monte Carlo Method." Numerical Heat Transfer Part A - Applications. 43(1):1-8. January 2003.
Sunden, Bengt and Mohammad Faghri. Modelling and Simulation of Turbulent Heat Transfer. WIT. (Development in Heat Transfer, v.16) 2003. 300p.
Taggart, D. G. , D. Chelidze, W. J. Palm and T. J. Kim. "Application of Abrasive Waterjet Machining in Undergraduate Engineering Courses." IN: Proceedings of 2003 WJTA American Waterjet Conference, August 17-19, 2003. CD-ROM.
Warnecke, Martin and Musa Jouaneh. "Backlash Compensation in Gear Trains by Means of Open-Loop Modification of the Inout Trajectory." Journal of Mechanical Design. 125(3):620-624. September 2003.
White, Frank M. Fluid Mechanics. Fifth Edition. McGraw-Hill. 2003. 866p. and CD.
White, Frank M. "Some Observations on Undergraduate Fluids Engineering Education." Proceedings of the ASME Fluids Engineering Division Summer Meeting. 2003. I:965-971.
Zaki, A. S. and H. Ghonem. "A Model for Fatugue Crack Instigation From Notches." American Society of Mechanical Engineers. NDE. 21:4956. 2003.
Zhang, Zongqin. SEE: Martonen, T. B.
|[an error occurred while processing this directive]|