Faculty Publications 2012
Abotula, Sandeep, Addis Kidane, Vijay B. Chalivendra and Arun Shukla. "Dynamic Curving Cracks in Functionally Graded Materials Under Thermo-Mechanical Loading." International Journal of Solids and Structures. 49(13):1637-1655. 15 June 2012.
Abu-Nada, Eiyad, Anurag Kumar, Yutaka Asako and Mohammad Faghri. "Dissipative Particle Dynamics for Complex Geometries Using Non-Orthogonal Transformation." International Journal for Numerical Methods in Fluids. 68(3):324-340. January 30, 2012.
Anagnostopoulos, Constantine N. SEE: Chen, Hong.
Cardoza, Shane M., Vijaya Chalivendra, Arun Shukla and Sze Yang. "Damage Detection of Rubber Toughened Nanocomposites in the Fracture Process Zone Using Carbon Nanotubes." Engineering Fracture Mechanics. 96:380-391. December 2012.
Chelidze, David. SEE also: Walls, Theodore A.
Chelidze, David. "Dynamical Systems Approach to Motion Analysis and to Tracking the Associated Physiologic Processes (Abstract)." Annals of Behavioral Medicine. 43(S1):S73. April 2012.
Chen, Hong, Jeremy Cogswell, Constantine Anagnostopoulos and Mohammad Faghri. "A Fluidic Diode, Valves, and a Sequential-Loading Circuit Fabricated on Layered Paper." Lab on a Chip. 12(16):2909-2913. August 21, 2012.
Dahal, Jinesk M. and Hamouda Ghonem. "Grain Boundary Deformation and Fracture Mechanisms in Dwell Fatigue Crack Growth in Turbine Disk Superalloy." IN: Superalloys 2012; Proceedings of the International Symposium on Superalloys, 12th, Seven Springs, PA, United States, September 9-13. 2012. p. 149-158.
Datseris, Philip. SEE: Liu, Ming.
Faghri, Mohammad. SEE: Abu-Nada, Eiyad; Hong; Chungpyo; Li, Peng; Yamada, Toru.
Garcia, G., J. H. Wang, E. Colantonio, C. Collyer and V. Maier-Speredelozzi. "Integrating Simulation in the State of Rhode Island: Teenage Driver Education: A Pilot Study (Abstract)." Annals of Behavioral Medicine. 43(S1):S76. April 2012.
Gardner, N., E. Wang, P. Kumar and A. Shukla. "Blast Mitigation in a Sandwich Composite Using Graded Core and Polyurea Interlayer." Experimental Mechanics. 52(2):119-113. February 2012.
Gardner, Nate, Erheng Wang and Arun Shukla. "Performance of Functionally Graded Sandwich Composite Beams Under Shock Wave Loading." Composite Structures. 94(5):1755-1770 April 2012.
Gauch, Erin, James Leblanc and Arun Shukla. "Response of Preloaded Thin Composite Panels Subjected to Underwater Explosive Loading." Computers & Structures. 112-113:342-353. December 2012.
Gauffreau, Andrew M. and Keunhan Park. "Fentogram-Level Thermophysical Property Measurement of Polymeric Samples Using Heated Microcantilevers." IN: Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference. 2012.
Ghonem, Hamouda. SEE: Dahal, Jinesk M.; Maciejewski, Kimberly; Sun, Y.
Gupta, S. and A. Shukla. "Blast Performance of Marine Foam Core Sandwich Composites at Extreme Temperatures." Experimental Mechanics. 52(9):1521-1534. November 2012.
Gupta, Sachin, Sandeep Abotula, Vijaya B. Chalivendra, Arun Shukla and Ravi Chona. "Transient Thermo-Mechanical Analysis of Dynamic Curving Cracks in Functional Graded Materials." Acta Mechanica. 223(7):1485-1506. July 2012.
Heeder, N., A. Shukla, V. Chalivenda, S. Yang and K. Park. "Electrical Response of Carbon Nanotube Reinforced Composites Under Static and Dynamic Loading." Experimental Mechanics. 52(3):315-322. March 2012.
Heeder, N., A. Shukla, V. Chalivenda and S. Yang. "Sensitivity and Dynamic Electrical Response of CNT-Reinforced Nanocomposites." Journal of Materials Science. 47(8):3808-3816. April 2012.
Hong, Chungpyo, Yutaka Asako, Koichi Suzuki and Mohammad Faghri. "Experimental Investigations of Laminar, Transitional and Turbulent Gas Flow in Microchannels." International Journal of Heat and Mass Transfer. 55(15-16):4397-4403. July 2012.
Hong, Chungpyo, Yutaka Asako, Koichi Suzuki and Mohammad Faghri. "Friction Factor Correlations for Compressible Gaseous Flow in a Concentric Micro Annular Tube." Numerical Heat Transfer: Pt. A - Applications. 61(3):163-179. February 2012.
Jouaneh, M., J. Boulmetis and W. Palm. "Take-Home Experiments in Engineering Education: Evaluation Methods and Lessons Learned." International Journal of Engineering Education. 2012.
Knickle, Harold N., Oleg Kravchenko, Suvorova Iryna and Igor Baranov. "Innovative Hydrocavitatiion Technology Process to Create Composite Fluids." IN: AIChE and the Global Congress on Process Safety Annual Meeting, Conference Proceedings 2012.
Knight, W. A., Regional Editor. International Journal of Machine Tools & Manufacture; Design, Research and Application. Vol.52-59, 2012.
Kumar, Puneet, James LeBlanc, David S. Stargel and Arun Shukla. "Effect of Plate Curvature on Blast Response of Aluminum Panels." International Journal of Impact Engineering. 46(1):74-85. August 2012.
LeBlanc, James. SEE : Gauch, Erin; Kumar, Puneet.
Lee, Bong Jae, Keuhan Park, Timothy Walsh and Lina Xu. "Radiative Heat Transfer Analysis in Plasmonic Nanofluids for Direct Solar Thermal Absorption." Journal of Solar Energy Engineering. 134(2):021008. May 2012. 6p.
Lee, I., K. Park and J. Lee. "Note: Precision Viscosity Measurement Using Suspended Microchannel Resonators." Review of Scientific Instruments. 83(11):#116106. November 2012.
Lee, Sunghwan, Keunhan Park and David C. Paine. "Metallization Strategies for In203-Based Amorphous Oxide Semiconductor Materials." Journal of Materials Research, Suppl. Focus Issue: Oxide Semiconductors. 27:2291-2308. September 14, 2012.
Li, Peng, Jeremy Cogswell and Mohammad Faghri. "Design and Test of Passive Planar Labyrinth Micromixer for Rapid Fluid Mixing." Sensors and Activators B: Chemical. 174:126-132. November 2012.
Liu, Ming, Philip Dewhurst and He Huang. "Prototype for Smart Prosthetic Legs - Analysis and Mechanical Design." Advances in Material Sciences. 403-408:1999-2006. 2012.
Maciejewski, Kimberly and Hamouda Ghonem. "Relative Contributions of Secondary and Fracture Mechanisms in Dwell Fatigue Crack Growth in Turbine Disk Supperalloy ME3." IN: Superalloys 2012; Proceedings of the International Symposium on Superalloys, 12th, Seven Springs, PA, United States, September 9-13. 2012. p.421-430.
Maciejewski, Kimberly and Hamouda Ghonem. "Relative Contributions of Secondary and Tertiary y Precipitates to Intergranular Crack Growth Resistance in IN100 Alloy." IN: Superalloys 2012; Proceedings of the International Symposium on Superalloys, 12th, Seven Springs, PA, United States, September 9-13. 2012.
Maciejewski, Kimberly, Yaofeng Sun, Otto Gregory and Hamouda Ghonem. "Time-Dependent Deformation of Low Carbon Steel at Elevated Temperatures." Materials Science and Engineering A. Structural Materials: Properties, Microstructure and Processing. 534:147-156. 1 February 2012.
Maier-Speredelozzi, Valerie. SEE: Garcia, G.
Messina, J., M. Song, J. D. Ortiz-Varela and J. H. Wang. "Assessing the Message Design on Variable Message Signs in Mitigating the Bottleneck Issue at Work Zones." IN: Proceedings of the 92nd Annual TRB Meeting. No.12-3426. 2-012. p.1-17.
Palm, William J. SEE: Jouaneh, Musa K.
Park, Keuhan. SEE: Gauffreau, Andrew M.; Lee, Bong Jae; Lee, I.; Lee, Sunghwan.
Purohit, Kaushalkuman, Maureen Mirville, Sze C. Yang, Arun Shukla and Vijaya B. Chalivendra. "Conductive name-Brush Synthesized by Physical Grafting of Conducting Polymers on Carbon Nanatube." IN: Hierarchical Materials and Composites - Combining Length Scales From Nano to Macro. (Materials Research Society Symposium Proceedings Vol.1304) 2-12. p.13-19.
Shukla, Arun. SEE: Abotula, Sandeep; Cardoza, Shane M.; Gardner, Nate; Gauch, Erin; Gupta, Sach; Heeder, N.; Kumar, Puneet; Purohit, Kaushalkuman; Wang, E.
Sun, Y., K. Maciejewski and H. Ghonem. "Simulation of Viscoplastic Deformation of Low Carbon Steel Structures at Elevated Temperatures." Journal of Materials Engineering and Performance. 21(7):1151-1159. July 2012.
Vadlamani, Venkat K., Viysaya Chalivendra, Arun Shukla and Sze Yang. "In Situ Sensing of Non-Linear Deformation and Damage in Epoxy Particulate Composites." Smart Materials and Structures. 21(7):075011. July 2012.
Vadlamani, Venkat K., Vijaya Chalivendra, Arun Shukla and Sze Yang. "Sensing of Damage in Carbon Nanotubes and Carbon-Black Embedded Epoxy Under Tensile Loading." Polymer Composites. 33(10):1809-1915. October 2012.
Walls, Theodore, David Chelidze, Helen Huang and Santesh Kumar. "Device-Enabled Measurement of Health Behaviors in Real-Time (Abstract)." Annals of Behavioral Medicine. 43(S1):S72. April 2012.
Wang, E. and A. Shukla. "Blast Performance of Sandwich Composites With In-Plane Compression Loading." Experimental Mechanics. 52(1):49-58. January 12, 2012.
Wang, Jyh-Hone. SEE: Messina, J.
White, Frank M. "A Brief History of the ASME Journal of Fluids Engineering." Journal of Fluids Engineering. 134(2):02031-1 & 2. February 2012.
Wilson, Mason P. Jr. "My Prescription for Recovery (Letter)." Providence Journal. June 8, 2012. p.B7.
Yamada, Toru, Yukata Asaka, Otto J. Gregory and Mohammad Faghri. "Simulation of Thermal Conductivity of Nanofluids Using Dissipative Particle Dynamics." Numerical Heat Transfer, Pt. A. 61(5):323-337. 2012.