Faculty Publications 1994
Asako, Y. , Y. Yamaguchi, L. Chen and M. Faghri. "Combined Natural Convection and Radiation Heat Transfer in a Vertical Air Layer With a Hexagonal Honeycomb Core of Negligible Thickness." Journal of Engineering Thermophysics. 15 (3):304-310. 1994.
Asako, Y., M. Faghri, M. Charmchi and P. A. Bahrami. "Numerical Solution for Melting of Unfixed Rectangular Phase-Change Material Under Low-Gravity Environment." Numerical Heat Transfer. Part A: Applications. 25(2):191-208. Feb. 1994.
Asako, Y. and Mohammad Faghri. "Parametric Study of Turbulent Three-Dimensional Heat Transfer of Arrays of Heated Blocks Encountered in Electronic Equipment. International." Journal of Heat and Mass Transfer. 37 (3):469 478. 1994.
Asako, Y. and Mohammad Faghri. "Prediction of Turbulent Heat Transfer in the Entrance of an Array of Heated Blocks Using Low Reynolds Number K E Model." IN: Current Developments in Numerical Simulation of Flow and Heat Transfer. ASME. (HTD-Vol.275) 1994. p.27-33.
Brandes, Horst G., Armand J. Silva, Martin H. Sadd and G. E. Veyera. "Stress Strain Time Modeling of Submarine Slopes." IN: Computer Methods and Advances in Geomechanics: Proceedings of the Eighth International Conference .... Edited by H. J. Siriwardane and M. M. Zaman. A. A. Balkema. 1994. 3:2435-2440.
Faghri, Mohammad. SEE also: Asako, Y.; Molki, M.; Zhang, Hanzhong.
Faghri, Mohammad, M. Molki, J. Chrupscala and Y. Asaka. "Entrance Analysis of Turbulent Flow in an Array of Heated Rectangular Blocks." IN: Intersociety Conference on Thermal Phenomena in Electronic Systems (4th. 1994. Washington, D.C.) Concurrent Engineering and Thermal Phenomena. IEEE. 1994. p.198-206.
Faghri, Mohammad and Y. Asako. "Prediction of Turbulent Three-Dimensional Heat Transfer of Heated Blocks Using Lo- Reynolds Numer Two-Equation Model." Numerical Heat Transfer. Pt.A, Applications. 26(l):87-101. July 1994.
Faghri, M. , Y. Asako, G. M. Berard and A. Chaboki. "Unsteady Laminar Natural Convection, Radiation and Conduction Within an Enclosure With an Obstruction." International Journal of Science and Technology.1(1):85-95. 1994.
Ghonem, Hamouda. SEE: Rosenberger, A. H.; Tamin, M. N.
Ghonem, H., Y. Wen and D. Zheng. "An Interactive Simulation Technique to Determine the Internal Stress States in Fiber Reinforced Metal Matrix Composites." Materials Science and Engineering. A. Structural Materials: Properties, Microstructure and Process. 117(1 2):125-134. April 1994.
Ghonem, H. and D. Zheng. "A Link Between the Slip Line Density and the Oxidation Resistance of the Fatigue Crack Growth in Alloy 718." IN: Superalloys 718, 625, 706 and Various Derivitives: Proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivitives Sponsered by the Minerals, Metals & Materials Society and Cosponsored by ASM Internatiuonal and National Association of Corrosion Enaineers, Held June 26-29, 1994. Edited by E. A. Loria. The Society. 1994. p.633-634.
Hu, Zhimin, Zhaoyuan Han and F. M. White. "Study of the Curved Jet Oscillation Phenomenon Activated by Resonant Gaseous Column." IN: Proceedings of the 1994 ASME Fluids Engineering Division Summer Meeting. Part 2. ASME. (FED v. 180) 1994. p.49-53.
Ibrahim, Osama M. SEE also: Ladas, H. G.
Ibrahim, Osama H. "Prediction of Local Heat Transfer Coefficients During Annular Flow Condensation." IN: Proceedings of the 1994 ASME Fluids Engineering Division Summer Meeting. Part 2. ASME. (FED v. 180) 1994. p.77-81.
Khanna, Sanjeev K. and Arun Sbukla. "Development of Stress Field Equations and Determination of Stress Intensity Factor During Dynamic Fracture of Orthotropic Composite Materials." Engineering Fracture Mechanics. 47 (3):345-359. February 1994.
Khanna, S. K. and A. Shukla. "Influence on Fiber Inclination and Interfacial Conditions on Fracture in Composite Material." Experimental Mechanics. 34(2):171-180. June 1994.
Kim, Thomas J. SEE also: Sheridan, Matthew D.
Kim, Thomas J. "From the Dean's Desk." University of Rhode Island Engineering Newsletter. 1(1):2. Fall 1994.
Ladas, H. G. and O. M. Ibrahim. "Finite Time View of the Sterling Engine. " Energy. 19(8):837-843. August 1994.
Madsen, A. and H. Ghonem. "Effects of Aging on the Tensile and Fatigue Behavior of the Near-Alpha-Ti-1100 at Room Temperature and 593 Degrees C." Materials Science and Engineering. A. Structural Materials: Properties, Microstructure and Process 117(1 2):63-73. April 15, 1994.
Molki, M. and M. Faghri. "Conjugate Natural Convection Heat Transfer in a Vertical Annulus With Internal Circumferential Fins." Numerical Heat Transfer, Part A. Applications. 25(4):457-476. April 1994.
Molki, Majid and Mohammad Faghri. "Correlation of Heat Transfer and Wake Ef fect in the Entrance Region of an Inline Array of Rectangular Modules." IEEE Transactions on Geoscience and Remote Sensing. 32(2):1-9. March 1994.
Molki, M. and M. Faghri. "Interaction Between a Buoyancy-Driven Flow and an Array of Annular Cavitiers." IN: Sadhana; Academy Proceedings in Engineering Sciences. 19 (5):705+ 1994.
Molki, M., M. Faghri and O. Ozbay. "A New Correlation for Pressure Drop in Arrays of Rectangular Blocks in Air-Cooled Electronic Units." Journal of Fluids Engineering. 116(4):856-861. December 1994.
Patton, Alexander J. Fire Litigation Sourcebook. Second Edition. Wiley. 1994. 2v
Rosenberger, A. H. and H. Ghonem. "High Temperature Elastic-Plastic Small Crack Growth Behavior in a Nickel-Based Superalloy." Fatigue Fracture of Engineering Materials Structures. 17 (5):509-521. May 1994.
Rosenberger, A. H. and H. Ghonem . " Influence of Creep-Fatigue Interaction on High Temperature Fatigue Crack Growth Behavior of Ti-100." Fatigue Fracture of Engineering Materials Structures. 17(4):397-410. April 1994.
Sadd, Martin H. SEE also: Brandes, H. G .; Tian, W. M.
Sadd, M. H., W. M. Tian, A. J. Silva and G. E. Veyera. "Modeling Creep Behavior of Anistropically Consolidated Marine Clays." IN: Proceedings of the Eighth International Conference on Computer Methods & Advances in Geomechanics, Morgantown, West Virginia. 1994.
Sadd, Martin H., Shukla, Arun, Frank Sienkiewicz and A. Gautam. "On the Role of Pore Fluid and Interparticle Cementation on Wave Propagation in Granular Materials." IN: Wave Propagation and Emerging Technologies. American Society of Mechanical Engineers. (AMD v. 188) 1994. p.11-28.
Sheridan, Matthew D., David G. Taggart and Thomas J. Kim. "Screw Thread Machining of Materials Using Abrasive Wateriet Cutting." IN: Manufacturing Science and Engineering New Product Introduction Measurement and TnsT)ection of Products and Processes Non Traditional Manufacturing Processes in the 1990s. American Society of Mechanical Engineers. (PED v. 68-1) 1994. p.421-432.
Shukla, Arun. SEE also: Khanna, Sanjeeve K.; Sadd, Martin H.; Steele, Charles; Zhou, Chonghua.
Shukla, Arun, Associate Editor. Experimental Mechanics. v. 34, 1994.
Shukla, A., R. Singh and C. G. Zhou. "High Strain Rate Evaluation of Materials Using Fiber Optic Technology" IN: International Conference on Experimental Mechanics (10th. 1994. Lisbon, Portugal) Recent Advances in Experimental Mechanics: Proceedings .... Edited by J. F. Silva Gomes et. al. A. A. Balkema. 1994. p. 583 588.
Shukla, Arun, Editorial Board. Lasers and Optics in Engineering. 1994.
Singh, R. and A. Shukla. "Fiberoptic Sensors for Dynamic Wave Propagation Studies." IN: Proceedings of the 1994 SEM Spring Conference on Experimental Mechanics. 1994. p.514-519.
Steele, Charles, A. J. Rossakis, A. Shukla and Y. D. S. Rajapakse, eds. "Proceedings of the Dynamic Failure Mechanics of Modern Materials." International Journal of Solids and Structures. 32(17 18):2421-2834. February 1994.
Taggart, Donald G. SEE also: Sheridan, Matthew D.
Taggart, D G. and Y. Wen. "Thermal Deformation and Residual Stresses in Particulate Metal-Matrix Composites." IN: Developments in Theoretical and Applied Mechanics, Vol.XVII; Proceedings.... Eds. I. C. Jong & F. A. Aki. Lousiana Tech College of Engineering. 1994. p.511-520.
Tamin, M. N. and H. Ghonem. "Fracture Criterion for Bridging Fibers in Titanium Metal Matrix Composites at Elevated Temperature " IN: Proceedings of the 1994 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers. (MD v. 51) 1994.
Tamin, M. N., D. Zheng and H. Ghonem. "Time-Dependent Behavior of Continuous-Fiber-Reinforced Metal Matrix Composites: Modeling and Applications." Journal of Composites Technology and Research. 16 (4):314-322. October 1994.
Tian, W. M. , A. J. Silva, G. E. Veyera and M. H. Sadd. "Drained Creep of Undisturbed Cohesive Marine Sediments." Canadian Geotechnical Journal. 31:841-855. 1994,
White, Frank M. SEE also: Hu, Zhimin; Zhang, Hanzhohg
White, F. M., Editor. Contributed Papers in Fluids Engineering. ASME. (FED v. 182) 1994. 77p.
White, Frank M. Fluid Mechanics. 3rd ed. McGraw Hill. (Schaum's Outline Series in Mechanical Engineering) 1994. 7 36p,.+ 1 Computer Disk.
White, F. M., Editor. Individual Papers in Fluids Engineering. ASME. (FED v.202)1994. 74p.
White, F., Board of Communications. Manufacturing Review. Vol. 6, 1993.
White, F. M., Editor. Proceedings of the 1994 ASME Fluids Engineering Division Summer Meeti . ASME. (FED v. 193) 1994. 18p.
Zhang, Hanzhong, Mohammad Faghri and Frank M. White. "A New Low-Reynolds-Number K-E Model for Turbulent Flow Over smooth and Rough Surfaces." IN: Proceedings of the 1994 International Mechanical Engineering Congress & Exhibition of the Winter Annual Meeting. ASME. 1984. p.1-10.
Zhou, Chonghua H., Arun Shukla, Stephen Letcher, Raman Singh and Frank Sieniewicz. "On the Use of Microbend Fiber Optic Sensor in Material Characterization." IN: Fiber Optic Physical Sensors in Manufacturing and Transportation. Edited by J. W. Berthold, R. O. Calus, M. A. Marcus and R. S. Rogowski. SPIE. (Proceedings of the SPIE v. 2072) 1994. p.214-223.